ASICS Gt-2000, Men's Gt-2000 9

Product Information

they are capable of reacting to an initial breakdown or failure detected so as to remain either in a state that guarantees safety, in a lower operating mode or in a fail-safe state, The notified body must affix or cause to be affixed, its identification symbol to each approved component and draw up a written certificate of conformity relating to the tests carried out. In the absence of harmonised European standards, Member States shall take the necessary measures to inform parties concerned of those existing national standards and technical specifications which are regarded as important or useful for ensuring proper transposition of the essential requirements referred to in Article 3(1). It is, moreover, in the interest of the Member States to have an international standardisation system capable of producing standards which are actually used by international trading partners and satisfy the requirements of Community policy.

It must be possible for children and persons with reduced mobility to use the installation safely if the installation is designed for the transport of such persons. OJ L 204, 21.7.1998, p. 37. Directive as amended by Directive 98/48/EC (OJ L 217, 5.8.1998, p. 18). The installation must be designed and constructed in such a way as to ensure that any internal or external nuisance resulting from noxious gases, noise emissions or vibrations falls within the prescribed limits.Where neither the manufacturer nor his authorised representative is established within the Community, the obligation to keep the technical documentation available is the responsibility of the person who places the component on the Community market. The improved mesh is more flexible and breathable. You will find a seamless constructed upper which means there are no points of irritation. Member States may not, on the basis of this Directive, prohibit, restrict or impede the placing on their national markets for use in an installation, of subsystems which comply with the provisions of this Directive.

The notified body must assess the quality system to determine whether it satisfies the requirements referred to in point 3.2. It shall presume compliance with these requirements in respect of quality systems that implement the relevant harmonised standard. The ASICS Gt 2000 9 underwent an upper redesign since the last edition, new materials were used. The directorie blue and lime zest colorway is bright and makes a statement.Cableway installations are principally operated in connection with tourism, particularly in mountain areas, which plays an important role in the economy of the regions concerned and is becoming an increasingly important factor in the trade balances of the Member States. From a technical point of view, the cableway installations sector also ranks among the industrial activities linked to the production of capital equipment and to activities in the building and civil engineering sector. the measures relating to a subsystem are unjustified, it shall immediately so inform the manufacturer or his authorised representative established in the Community or, in their absence, any natural or legal person having placed the subsystem in question on the market, and the Member State which took the measures.

Each notified body must forward to the other notified bodies the relevant information concerning the quality system approvals issued and withdrawn. The manufacturer must operate an approved quality system for design, manufacture and final component inspection and testing as specified in point 3 and shall be subject to surveillance as specified in point 4. The GT 2000 9 runs true to size. It is a snug fit throughout the shoe. Some tightness was felt in the heel and midfoot, but especially in the midfoot. The notified body must assess the quality system to determine whether it satisfies the requirements referred to in point 3.2. It presumes conformity with these requirements in respect of quality systems that implement the relevant harmonised standards.

DURABLE OUTSOLE FOR MILE AFTER MILE

The manufacturer or his authorised representative resident within the Community must keep a copy of the declaration of conformity for a period ending at least 30 years after the last component has been manufactured. The Commission shall enter into consultation with the parties concerned at the earliest opportunity. Where, after such consultation, the Commission finds that: Where a Member State or the Commission considers that a European specification as referred to in paragraph 2 does not entirely satisfy the essential requirements referred to in Article 3(1), the Commission or the Member State concerned shall bring the matter before the committee referred to in Article 17 giving the reasons therefor. The committee shall deliver an opinion without delay. Member States shall publish the references of national standards used to transpose harmonised European standards. Where a Member State considers a safety component or subsystem referred to in Annex I to have been designed or constructed using an innovative approach, it shall take all appropriate measures and may make the construction and/or putting into service of an installation in which such innovative components or subsystems are to be used subject to special conditions. It shall immediately inform the Commission thereof, stating its reasons. The Commission shall immediately refer the matter to the committee provided for in Article 17.

The manufacturer must, for a period ending at least 30 years after the last component has been manufactured, keep at the disposal of the national authorities: the technical design specifications, including the European specifications referred to in Article 2(2) of this Directive, that will be applied and, where the European specifications will not be applied in full, the means that will be used to ensure that the essential requirements of this Directive that apply to the products will be met,The ASICS GT 2000 9 weighs 9.9oz (281g), which is pretty moderate for most stability running shoes (10.5oz/297g average weight). Even with the weight that accounts for many of the stability features within a shoe of this type, I was impressed with how much bounce and response the shoe showed. For the purposes of this Directive, a harmonised standard is a technical specification (European standard or harmonisation document) adopted by one or other of those bodies, or by both, at the request of the Commission pursuant to Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations and of rules on information society services(6) and in accordance with the general guidelines referred to above. In relation to standardisation, the Commission should be assisted by the committee referred to in that Directive, which will, if necessary, consult technical experts. A procedure is necessary for the inspection of subsystems of cableway installations before they are put into service. Such inspection must enable the authorities to satisfy themselves that at each stage of the design, manufacturing and entry into service, the result obtained conforms with the applicable provisions of this Directive. This must enable manufacturers to count on equal treatment, irrespective of the Member State in question. The principles and conditions governing EC verification of subsystems of installations should therefore be defined. Where Council Directive 85/337/EEC(4) so requires, the effects of cableway installations on the environment must be assessed; above and beyond the effects mentioned in that Directive, both environmental protection and requirements in connection with the sustainable development of tourism should be taken into account.