GODOX X1R-C Canon receiver Wireless Flash Receiver Canon cameras and MI shoe Wireless LCD Flash Transmitter Godox 2.4G trigger system

Product Information

Přijímač X1R-C je možné synchronizovat s řídícími jednotkami Godox X1T-C nebo Godox Xpro. Ve spojení s těmito jednotkami nabídne plnou podporu TTL komunikace, vysokorychlostní synchronizaci (HSS až do 1/8000s), bezdrátové ovládání blesku (mód blesky, kompenzace expozice blesku, výkon blesku, zoom blesku, …). DPReview - Sailorblue - Review of Selens 65cm 26" Foldable Collapsible Beauty Dish Softbox & Honeycomb Grid Flash

Considering the price, there is very little to fault with the Godox X1 system. It puts in a solid performance, and considering the price, the build quality and function are exceptional.Error #2: the Canon "radio" modes are for the Canon RT system that's built into the 600EX-RT. This is a completely separate and incompatible radio system from Godox's X system. Yes, they're both on 2.4 GHz, but so are wi-fi and bluetooth. They use two different communication protocols and do not speak to each other. If you want to use the built-in transceiver (and not have to add an additional receiver onto the foot of the 600EX-RT), you should have gone with the Canon, Jinbei, Phottix, or Yongnuo RT-compatible triggers, not Godox. You can do as tugwilson suggested and sell your 430EX II and 580EX II and replace them with Godox TT685 (there isn't a TT680) or V860II flash units but the cost will be significant. WIRELESS REMOTE CONTROL: Use a combination of 5 groups and 32 channels to trigger an almost unlimited number of Godox and other compatible flashes. Easily control flash settings using the big and clear LCD panel that offers convenient access to settings and flash modes.

Bezdrátový radiový přijímač Godox X1R-C je určený pro originální blesky Canon (430EX II / 580EX II / 600EX-RT / 430EX III-RT / 600EX II RT) a blesky dalších výrobců podporující komunikaci E-TTL II. Přijímač je také možné připojit ke studiovému blesku pomocí synchronizačního kabelu (synchronizační kabel není součástí balní) a využít možnosti vysokorychlostní synchronizace s časy až do 1/8000s i se studiovými blesk (metoda HyperSync).

Godox X1R-C wireless receiver FEATURES

BUILT IN 2.4G WIRELESS TRANSMITTER: The godox X1R receiver has a built in wireless 2.4G transmission system allowing you to use both a trigger and receiver with your branded flash. With a distance of 100m,you can position yourself conveniently from your flash allowing greater freedom when shooting. If you put it on top of your camera, you could set off your 430EX. Or you could buy a Canon transmitter and put it on your camera, and then set off, wirelessly using optical science, unconnected, your 580EX and the 430EX, both at the same time. These make up a very nice portable kit. The light stand and umbrella collapse to about 3" diameter x 20" long so they are easy to store or transport. Thank You very much for your reply, Do Godox have the same set with X2T Trigger and Receiver ? As i have read X2T is the newer version

It seems like getting the X1RC is the simplest method. Can you elaborate why I'd regret getting it? If you want more control, then you can switch your flash to a manual, and as you would expect, you can take complete creative control over the look and style of your images. Flashzebra.com has a couple of optical triggers advertised to be Canon EX compatible. Their item 0272 looks to be plug and play with a 580EXII while item 0118 needs a PC to hot-shoe adapter. LCD DISPLAY: The Godox X1R Receiver comes equipped with a LCD display allowing you to see any changes you make,allowing for precise control even in low light situations.

Initially, the two units take a few moments to connect and pushing the small test button confirms that the connection is made with a fire of the flash and blink of the red connection light. You can do as tdwesbo said and place your 430EX II and 530EX II flash units on Godox X1R-C receivers and control them from the XPRO. There's a micro-USB port under the rubber flap on the left side of the X1R-C that will allow you to attach it to a computer to update the firmware using the Godox G1 Firmware updater software.

Once connected, if the initial connection seems a little weak or the flash is firing at random due to interference, you can select from 32 channels until you find a clean one that is interference-free. The X1R-C receiver is compatible with the Godox 2.4Ghz RF radio system. It should work with an X2T-C transmitter. From the Godox X2T-C Manual and setting it on Channel 1 group B and then putting the Canon flash settings on wireless radio signal (that antenna beam icon) and have it set to slave group B. The "T" in X2T stands for "transmitter". The Godox X triggers are not transceivers they are dedicated transmitter/receiver units. You need an X1R-C receiver for the foot of the 600EX-RT. So my setup has the R2 on the hotshoe of my camera and I want to trigger both AD200 and 580exii. Can anyone tell me how to go about it? I also have 430exii, which I believe can be used as a slave. So will I be able to use all 3 flashes with R2Smart TCM Button: Long Press TCM Button can Transform the Flash Value in TTL Mode into the Power Output Value in M Mode; Short Press TCM Button Enables the Groups to be Switched Between the One-Group and Multi-Group Mode Canon's EX speedlights don't work well with most optical triggers. (the EX unit fires once and then won't fire again until its power is recycled)