Brother LS14S Metal Chassis Sewing Machine

Product Information

com, and you can also take a look at our accessories page to make sure you have everything you need to get started. I noticed the machine sounded loud and thumpy when going over humps, sometimes the backstitch lever would even rattle. If you have a non-BNPL balance, you will still need to make at least your minimum payment as shown on your statement. Another challenge with this machine is that you have almost no control over the stitch length, width, and needle position. You can’t leave your accessories in there loose or they’ll fall out every time you remove the front cover.

Whether you’re taking up trousers, adding a buttonhole or repairing a seam, the L14S makes every day sewing tasks simple to complete. The LS14s has a jam proof drop in bobbin which shows how much bobbin thread is left, whilst the LED light means that thread and fabric colours are not distorted.The repayment amount agreed for the repayment period will remain the same, meaning the repayment period may be shorter than originally agreed. It has the most important stitches: straight, zig zag, blind hem, rectangle buttonhole, and a few extras. There’s nothing wrong with the blind hem stitch itself, but in practice, it’s really hard to use without a blind hem foot.

On many machines, these results will only be achieved with the correct needle and thread combination, so specialty needles and threads may need to be purchased separately and may not be supplied with your machine. If you're a more experienced sewer looking for a second machine to take to sewing classes then this also a good choice.

I recommend to beginners or novice seamstress' to purchase one of these as it's great as a first sewing machine or one that is compact too. Accessories included: zig-zag foot, buttonhole foot, zipper foot, set needles, bobbin, screw driver disc and foot controller . If you decide to purchase this machine, I would also pick up a set of small screwdrivers to keep to hand. It’s rare that you would need two spools at the same time though, this would only be useful if you wanted to use a twin needle.